The Momentum True Wireless 5 charging case has a battery that can be replaced. The compatible Sennheiser battery is BA 502.
Here, we’ll guide you through each step. Watch our video instructions or follow the step-by-step guide. Your product box will also have the printed manual included.
You will require a Phillips screwdriver PH000 (not included in delivery).
Video Guide
The tutorial for the charging case starts at 0:50.
Step-by-Step Guide
Removing the battery
Remove the Phillips head screw from the bottom of the charging case.
Slide the battery compartment cover open and lift off the cover.
Pull the battery release strip to release the rechargeable battery and remove the battery from the battery compartment.
Inserting the new battery
Place the rechargeable battery into the battery compartment. Pay attention to the polarity and make sure to place the rechargeable battery over the release strip.
Place the battery compartment cover on the battery compartment and slide it closed. Attach the battery compartment cover by tightening the Philips head screw.
To test the function of the charging case with the new rechargeable battery, open and close the lid of the charging case to check the functionality of the LED display.
Was this article helpful?
0 out of 0 found this helpful
Still need help?
Can't find what you're looking for? Our Consumer Experience team is here to help.